AN8016NSH |
RFQ for AN8016NSH Required Field |
 |
| Technical/Catalog Information | AN8016NSHAVF |
| Vendor | Panasonic - SSG |
| Category | Integrated Circuits (ICs) |
| Type | Step-Up (Boost) |
| Number of Outputs | 1 |
| Voltage - Input | 1.8 ~ 14 V |
| Voltage - Output | Up to 15V |
| Current - Output | 40mA |
| Power - Output | 115mW |
| Package / Case | 10-SSOP |
| Packaging | Tape & Reel (TR) |
| Internal Switch(s) | Yes |
| Synchronous | No |
| Rds (On) | - |
| Operating Temperature | -30°C ~ 85°C |
| Frequency - Switching | 20kHz ~ 1MHz |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | AN8016NSHAVF AN8016NSHAVF AN8016NSHAVFTR ND AN8016NSHAVFTRND AN8016NSHAVFTR |
| Product | Manufacturers | Pack | D/C |
| AN8016NSH | - | SSOP | 2002 |
Typical Application |
Features |
| · LCD displays, digital still cameras, PDAs | · Wide operating supply voltage range: 1.8 V to 14 V· High-precision reference voltage circuit: 1.27 V (allowance:± 3%)· Supports control over a wide output frequency range:20 kHz to 1 MHz· Provides a fixed output current with minimal supply voltage fluctuations by using an external resistor to set the outputcurrent with a totem pole structure in the output block.· Large maximum output current of ± 50 mA· Timer latch short-circuit protection circuit (charge current: 1.3 mA typical)· Low input voltage malfunction prevention circuit (U.V.L.O.) (circuit operation start voltage: 1.6 V typical)· On/off control function (active-high, standby current: 5 mA maximum)· Fixed maximum duty ratio with small sample-to-sample variations (80% ± 5%)· Adjustable soft start time provided by using separate DTC and S.C.P. pins.· Adopts a 0.5 mm lead pitch 10 pin SO flat package (SSONF-10D)· Adopts techniques for reducing noise, increasing the light load efficiency, and suppressing the maximum base currentwhen turning on the npn transistor used as the external switching element. |
| Parameterm | Symbol | Rating | |
| Supply voltage | VCC | 15 | V |
| Off pin allowable application voltage | VOFF | 15 | V |
| IN- pin allowable application voltage | VIN- | VCC | V |
| Out pin allowable application voltage | VOUT | 15 | V |
| Supply current | ICC | - | mA |
| Output source currentr | ISO(OUT) | -50 | mA |
| Output sink currentn | ISI(OUT) | +50 | mA |
| Power dissipation * | PD | 115 | mW |
| Operating temperature | Topr | -30 to +85 | °C |
| Storage temperature | Tstg | -55 to +150 | °C |
